The compact reducer series R, is might and long-lived thanks to the particular choice of the materials and for the precise processing.
The reducer R, is costitued by paralle gears in syntherized and hardness steel, wich turn over fixed pin of hardeness steel. The first two gear-wheel, are in plastics substances for dumping the noise.
The exit axle, in hardeness steel, is supplaied with a milled surface and turns over bushes in syntherized antifriction brass.
The gearing box is realized in PBT 30V V-O resin, which gives the set particularly silent.
It is possible to combine the reducer with different kinds of motor, which is fixed with a hooked bracket.

General specifications:

Max torque: 8 Nm
Exit axle rotation time: 80 s min.  232 s max.
Ambience/working temperature: from -5°C to +55°C
Assembly: with 2 scews ø 4 mm in holes ø 4.2 mm
Assembly position: any (preferably with horizontal axle)
Average life: tests of resistence against fatigue, carried out with rotation of a counterpoise in both directions of rotation with torque of8 Nm, have reached 100.000 cycles.